Proface LT4300M - 5.7 Modular HMI + Control" Manuel d'utilisateur télécharger pdf (Page 21)

LT-4201TM/4301TM Installation Guide

English

The figure shows how to install the panel with the rear module:

1 Create the correct sized holes required to install the unit, using the panel cut-out dimension.

2 Insert the display module (with the tee, if required) into the panel hole (use a torque between 1.2

and 2 N•m (10.62 lb-in and 17.70 lb-in) to screw the nut with the tightening wrench).

3 Insert and push the rear module until it locks into place.

To remove the rear module, push the yellow button to unlock it, and then pull out the rear

module:

NOTICE

EQUIPMENT DAMAGE

Be sure to remove the rear module from the display module without twisting.

Failure to follow these instructions can result in equipment damage.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 46 47

Pas de commentaire

Proface LT4300M - 5.7 Modular HMI + Control" Manuel d'utilisateur Page 21