Proface LT4300M - 5.7 Modular HMI + Control" Manuel d'utilisateur télécharger pdf (Page 44)

Communication Interfaces

English

Attaching and Removing the USB Mini-B Holder

1 USB holder

2 USB cable

NOTE: The USB holder is supplied in the accessory kit PFXZGMAK1 (sold separately).

Ethernet Interface

Do not confuse the RJ45 Ethernet connector with the RJ45 interface.

NOTE: Ethernet networks should be installed by a trained and qualified person.

When you use a 1:1 connection to connect to a device such as PC, you can use a cross

cable, but we recommend using a hub.

Ethernet Interface Pin Assignment

The figure shows the RJ45 Ethernet connector pin assignment:

The table describes the RJ45 Ethernet connector pins:

NOTE: The LT supports the MDI/MDIX auto-crossover cable function. You do not have to

use special Ethernet crossover cables to connect devices directly to this interface

(connections without an Ethernet hub or switch).

Pin Signal

1TD+

2TD-

3 RD+

4–

5–

6 RD-

7–

8–

1 2 ... 39 40 41 42 43 44 45 46 47

Pas de commentaire

Proface LT4300M - 5.7 Modular HMI + Control" Manuel d'utilisateur Page 44